Introducing the 501 DT KwikSense Pro Smart Digital Gas Transmitter, a cutting-edge device meticulously crafted to detect a diverse range of toxic, oxygen, and flammable gases inherent in industrial environments.
Boasting unparalleled versatility, the 501 DT KwikSense Pro along with KwikSense Smart Sensors leverages innovative Smart Technology, rendering it universally compatible with a spectrum of toxic, oxygen, and flammable gas sensors. This revolutionary capability allows for seamless sensor interchangeability, ensuring effortless adaptation to evolving operational requirements.
Recognizing the value of time, the KwikSense Smart Sensors are equipped with Transportable Calibration. This ground-breaking feature allows the 501 DT KwikSense Pro Transmitter to facilitate rapid and straightforward sensor changes using pre-calibrated gas sensors. This not only saves valuable time but also presents a cost-effective solution. The ability to conduct non-intrusive calibration within hazardous areas further minimizes downtime by eliminating the need to open transmitters.
| Gas | Ordering Code | Range / Resolution | Sensor Technology | ||
| Acetic Acid | SSA0074A | 0 – 30 ppm | EC | ||
| 0.1 ppm | |||||
| Acetylene | SSA0099C | 0 – 100% LEL | Pellister | ||
| 1% LEL | |||||
| Ammonia | SSA0082A | 0 – 100 ppm | EC | ||
| 1 ppm | |||||
| Ammonia | SSA0082B | 0 – 1000 ppm | EC | ||
| 1 ppm | |||||
| Butadiene | SSA0099V | 0-50 ppm | PID | ||
| 1 ppm | |||||
| Butadiene | SSA0099S | 0 – 100% LEL | NDIR | ||
| 1% LEL | |||||
| Bromine* | SSA0061A | 0 – 20 ppm | EC | ||
| 0.1 ppm | |||||
| Butanol | SSA0099D | 0 – 100% LEL | Pellister | ||
| 1% LEL | |||||
| Carbon Dioxide | SSA0025A | 0 – 5% v/v. | NDIR | ||
| 0.01% v/v. | |||||
| Carbon Dioxide | SSA0025B | 0 – 100% v/v | NDIR | ||
| 1% v/v | |||||
| Carbon disulphide | SSA0021A | 0 – 50 ppm | PID | ||
| 0.1 ppm | |||||
| Carbon disulphide | SSA0021B | 0 – 100 ppm | EC | ||
| 1 ppm | |||||
| Carbon Monoxide | SSA0020D | 0 – 100 ppm | EC | ||
| 1 ppm | |||||
| Carbon Monoxide | SSA0020E | 0 – 200 ppm | EC | ||
| 1 ppm | |||||
| Carbon Monoxide | SSA0020F | 0 – 300 ppm | EC | ||
| 1 ppm | |||||
| Carbon Monoxide | SSA0020B | 0 – 500 ppm | EC | ||
| 1 ppm | |||||
| Carbon Monoxide | SSA0020A | 0 – 1000 ppm | EC | ||
| 1 ppm | |||||
| Carbon Monoxide | SSA0020C | 0 – 2000 ppm | EC | ||
| 1 ppm | |||||
| Chlorine | SSA0060B | 0-10 PPM | EC | ||
| 0.1 PPM | |||||
| Chlorine | SSA0060A | 0 – 20 ppm | EC | ||
| 0.1 ppm | |||||
| Chlorine Dioxide | SSA0062A | 0-1 PPM | EC | ||
| 0.1 PPM | |||||
| Ethylene | SSA0097A | 0 – 1500 ppm | EC | ||
| 5 ppm | |||||
| ETO*** | SSA0083A | 0 – 20 ppm | EC | ||
| 0.1 ppm | |||||
| ETO*** | SSA0083B | 0 – 100 ppm | EC | ||
| 1 ppm | |||||
| Formaldehyde | SSA0098A | 0 – 10 ppm | EC | ||
| 0.1 ppm | |||||
| HC (Methane) | SSA0099A | 0 – 100% LEL | Pellister | ||
| 1% LEL | |||||
| HC (Methane) | SSA0099G | 500 – 10000 ppm | Solid State | ||
| 10 ppm | |||||
| HC & H2 (MPS) | SSA0099AS | 0 – 100% LEL | MPS | ||
| 0.1% LEL | |||||
| HC | SSA0099H | 50 – 1000 ppm | Solid State | ||
| 1 ppm | |||||
| Hydrogen (IIC) | SSA0090C | 0 – 100% LEL | Pellister | ||
| 1% LEL | |||||
| Hydrogen (IIC) | SSA0090A | 0 – 1000 ppm | EC | ||
| 1 ppm | |||||
| Hydrogen (IIC) | SSA0090B | 0 – 100% LEL | EC | ||
| 1% LEL | |||||
| Hydro Carbon | SSA0099H | 50 – 1000 ppm | Solid State | ||
| 1 ppm | |||||
| Hydrogen Chloride* | SSA0070A | 0 – 20 ppm | EC | ||
| 0.1 ppm | |||||
| Hydrogen Cyanide | SSA0075B | 0 – 30 ppm | EC | ||
| 0.1 ppm | |||||
| Hydrogen Cyanide | SSA0075A | 0 – 100 ppm | EC | ||
| 1 ppm | |||||
| Hydrogen Fluoride* | SSA0072A | 0 – 10 ppm | EC | ||
| 0.1 ppm | |||||
| Hydrogen Sulphide | SSA0030B | 0-20 ppm | EC | ||
| 1 ppm | |||||
| Hydrogen Sulphide | SSA0030A | 0 – 100 ppm | EC | ||
| 1 ppm | |||||
| Iso-Butane | SSA0099O | 0 – 100% LEL | Pellistor | ||
| 1% LEL | |||||
| LPG | SSA0099B | 0 – 100% LEL | Pellister | ||
| 1% LEL | |||||
| LPG | SSA0099T | 0 – 100% LEL | NDIR | ||
| 1% LEL | |||||
| MEK | SSA0099P | 0 – 100% LEL | NDIR | ||
| 1% LEL | |||||
| Methane | SSA0099E | 0 – 100% LEL | NDIR | ||
| 1% LEL | |||||
| Methane | SSA0099F | 0 – 100% v/v | NDIR | ||
| 1% v/v | |||||
| Methanol | SSA0099K | 0 – 100 ppm | EC | ||
| 1 ppm | |||||
| Methanol | SSA0099M | 0 – 500 ppm | EC | ||
| 1 ppm | |||||
| Methanol | SSA0099U | 0 – 100% LEL | Pellister | ||
| 1% LEL | |||||
| Mercaptan* | SSA0035A | 0 – 20 ppm | EC | ||
| 0.1 ppm | |||||
| Methyl Bromide | SSA0051A | 0 – 200 ppm | Solid State | ||
| 1 ppm | |||||
| Mono Methyl Amine | SSA0087A | 0 -100 ppm | EC | ||
| 1 ppm | |||||
| N-Butane | SSA0099N | 0 – 100% LEL | Pellister | ||
| 1% LEL | |||||
| Methanol*** | Please Ask | 0 – 100 ppm | EC | ||
| 1 ppm | |||||
| Nitrogen Dioxide | SS00081A | 0 – 20 ppm | EC | ||
| 0.1 ppm | |||||
| Oxygen | SSA0010A | 0 – 25% v/v. | EC | ||
| 0.1% v/v. | |||||
| Ozone* | SSA0015A | 0-1 ppm | EC | ||
| 0.01 ppm | |||||
| PCl3* | SS00071A | 0-10 PPM | EC | ||
| 1 PPM | |||||
| Phosgene* | SS00055A | 0 – 1 ppm | EC | ||
| 0.01 ppm | |||||
| Phosphine | SSA0055A | 0 – 10 ppm | EC | ||
| 0.01 ppm | |||||
| Phosphine | SSA0050B | 0 – 20 ppm | EC | ||
| 0.1 ppm | |||||
| Phosphine | SSA0050C | 0 – 20 ppm | EC | ||
| 0.01 ppm | |||||
| Phosphine | SS00050E | 0 – 2000 ppm | EC | ||
| 1 ppm | |||||
| Phosphine | SSA0050D | 0 – 5000 ppm | EC | ||
| 10 ppm | |||||
| POCl3* | SS00073A | 0-20 PPM | EC | ||
| 1 PPM | |||||
| Propane | SSA0099J | 0 – 100% LEL | Pellister | ||
| 1% LEL | |||||
| Propane | SSA0099I | 0 – 100% LEL | NDIR | ||
| 1% LEL | |||||
| Propylene | SSA0099L | 0-2 % v/v | NDIR | ||
| 0.01% v/v | |||||
| Refrigerant R32 | SSA0041A | 5-100% LFL | MPS | ||
| 0.1% LFL | |||||
| Silane | SSA0053A | 0 – 15 ppm | EC | ||
| 1 ppm | |||||
| Sulphur Dioxide | SSA0040A | 0 – 20 ppm | EC | ||
| 0.1 ppm | |||||
| Vinyl Chloride (Vinyl Chloro Monomer)* | SSA0022A | 0 – 100 ppm | EC | ||
| 1 ppm | |||||
| VOC (Benzene) | SSA0100C | 0-20 PPM | PID | ||
| 0.1 PPM | |||||
| VOC (Benzene) | SSA0100F | 0 – 1000 ppm | PID | ||
| 1 ppm | |||||
| VOC (Isobutylene) | SSA0100B | 0-40 PPM | PID | ||
| 0.1 PPM | |||||
| VOC (Isobutylene) | SSA0100E | 0-100 PPM | PID | ||
| 1 PPM | |||||
| VOC (Isobutylene) | SSA0100A | 0 – 1000 ppm | PID | ||
| 1 ppm | |||||
| VOC (Isobutylene) | SSA0100D | 0-4000 PPM | PID | ||
| 1 PPM | |||||
| VOC (VCM) | SSA0100G | 0-100 PPM | PID | ||
| 1 PPM | |||||
| * | Consult Us before Offering/Quoting/Ordering | ||||
| ** | All Flammable gas sensors are calibrated on Methane as standard, if otherwise mentioned in the Pricelist. For calibration on any other gas, there will be an additional charge | ||||
| *** | Zero Clearing with Biased Cells – Some electrochemical sensors are biased with an excitation voltage. When power to the sensor is lost, this bias voltage slowly decays. When power is restored after long periods (multiple hours) of being unpowered, a surge in sensor output takes place and a long and slow re- establishing of the sensor’s zero baseline takes place. This re-stabilization time may range from 1 hour to 24 hours depending on the type of sensor and range of operation. The sensor types that this applies to are the following (e.g. all the VOC sensors). If this characteristic is problematic for your specific application, a battery backup or uninterruptible power supply is recommended. | ||||
