Key Features
✔ High Holding Power Design
The Delta Flipper Anchor offers a superior holding-to-weight ratio, making it highly effective in sand, clay, silt, and mud. Its wide flukes dig quickly into the seabed, delivering strong and reliable holding performance.
✔ Rapid Penetration & Full Embedment
The anchor’s streamlined profile and sharp fluke angle ensure rapid penetration during deployment, allowing it to set fast and achieve full embedment for maximum holding capacity.
✔ Excellent Stability Under Load
Designed to remain stable under varying angles of pull, the Delta Flipper maintains its grip even during strong tidal currents, dynamic loads, and vessel movements.
✔ Rugged & Durable Construction
Manufactured from high-grade, heat-treated steel, the anchor is built to withstand harsh offshore environments with high resistance to impact, abrasion, and corrosion.
✔ Class-Approved
Available with certificates from DNV, ABS, LR, BV, and other major Classification Societies. Meets offshore HHP mooring requirements.
Key Features
✔ High Holding-to-Weight Efficiency
The Danforth design offers extraordinary holding power relative to its weight, making it a preferred solution where lighter anchoring equipment is required without compromising safety.
✔ Large, Balanced Flukes
Its broad, symmetrical flukes provide outstanding grip in sand, mud, and silt, digging deeply and locking firmly into the seabed for secure holding.
✔ Fast Penetration & Easy Retrieval
The sharp fluke tips allow rapid seabed penetration, while the pivoting stock design enables smooth retrieval and resetting if the anchor is disturbed.
✔ Lightweight & Easy to Handle
Manufactured with a streamlined structure, the HHP Danforth Anchor is ideal for installations requiring reduced handling load, faster deployment, and simpler storage.
✔ Corrosion-Resistant & Durable
Built from high-strength steel with marine-grade finishing, the anchor withstands long-term exposure to harsh marine environments and heavy operational use.
✔ Class Approved
Available with certification from ABS, BV, LR, DNV, and other major classification societies. Fully compliant with HHP anchor standards.
Key Features
✔ Exceptional Holding Power
With its wide fluke area and optimized center of gravity, the AC-14 provides significantly higher holding power compared to conventional anchors of the same weight—ensuring reliable performance in sand, mud, clay, and silt.
✔ Superior Stability & Penetration
A low-profile design and balanced geometry allow the AC-14 to penetrate quickly and maintain stability under multi-directional loads. Even in soft seabed conditions, it achieves rapid embedment and minimal drag.
✔ Lightweight with High Efficiency
The AC-14 achieves strong holding capacity with less overall weight, reducing chain tension and easing handling during anchoring operations—making it highly efficient for frequent deployment.
✔ Smooth, Safe Stowage
Engineered to fit seamlessly into standard hawse pipes, the anchor’s compact fluke design ensures secure, quiet stowage and easy retrieval using any standard windlass system.
✔ Class Approved & Globally Recognized
Available with certifications from ABS, LR, BV, DNV and all major IACS classification societies. Fully compliant with international standards for High Holding Power (HHP) anchors.
Key Features
✔ Enhanced Holding-to-Weight Ratio
Through advanced design and increased fluke surface area, HHP anchors achieve 2–3 times the holding power of standard anchors—reducing required anchor weight without sacrificing performance.
✔ Fast Seabed Penetration
The anchor’s optimized tip design allows it to dig quickly and deeply into sand, silt, clay, and mud, providing reliable holding even in challenging environments.
✔ Stable Under Dynamic Loads
HHP anchors remain stable during vessel movement, tidal shifts, and multi-directional loading, ensuring consistent performance and improved safety.
✔ Durable & Corrosion-Resistant
Manufactured from high-quality, heat-treated steel and finished with marine-grade coatings to withstand decades of heavy-duty service, impact, and harsh environmental conditions.
✔ Class-Approved
Certified by major classification societies such as BV, DNV, ABS, LR, ensuring full compliance with international marine safety standards.
Key Features
✔ Optimized High Holding Power Design
The TW Type Anchor provides significantly greater holding power than traditional stockless anchors of the same weight, meeting the requirements for HHP classification under major marine authorities.
✔ Enhanced Penetration & Rapid Setting
Its improved fluke angle and streamlined profile allow fast and deep seabed penetration, delivering reliable holding in sand, mud, clay, and silt with minimal drag.
✔ Stable Under Multi-Directional Loads
Engineered for stability and resistance against rolling, the TW Type Anchor maintains secure holding even during strong currents, vessel motion, or shifting wind and tidal forces.
✔ Durable, High-Strength Construction
Manufactured from high-grade cast steel, the anchor provides superior toughness and corrosion resistance—ensuring long service life in demanding marine environments.
✔ Efficient Stowage & Compatibility
As a stockless design, it fits easily into standard hawse pipes and windlass systems, offering smooth handling, retrieval, and secure stowage on board.
✔ Class Approved
Available with certificates from DNV, ABS, LR, BV, and other major IACS-recognized classification societies.
Key Features
✔ Reliable Holding Performance
The Spek Anchor provides stable and dependable holding in most common seabed types—sand, silt, mud, and clay—making it a versatile and trustworthy anchoring solution for global marine operations.
✔ Balanced, Compact Design
Its refined geometry ensures optimal weight distribution and reduced rolling, improving seabed penetration and enhancing overall holding capability.
✔ Smooth Self-Stowing Capability
The Spek Anchor is designed to self-align and stow neatly into the hawse pipe, allowing safe, efficient retrieval and handling with standard windlass systems.
✔ Durable Construction
Manufactured with high-grade cast steel, the anchor delivers long-term resistance to impact, wear, and corrosion in harsh marine environments.
✔ Low-Maintenance Structure
With fewer moving parts and a robust, simple design, the Spek Anchor offers excellent reliability with minimal maintenance requirements.
✔ Class Certified
Available with certificates from ABS, DNV, LR, BV, and other major IACS classification societies.
Key Features
✔ Standardized Under JIS-F3301
Manufactured according to the JIS-F3301 marine standard, guaranteeing consistent quality, dimensional accuracy, and compatibility with shipbuilding requirements across the industry.
✔ Reliable Holding Capability
Designed with balanced flukes and a stable, low-profile structure, the anchor offers solid holding performance in common seabed types such as sand, mud, silt, and clay.
✔ Smooth Self-Stowage
As a stockless anchor, it self-aligns easily when hoisted, ensuring safe and proper seating in the hawse pipe during retrieval—ideal for vessels that frequently anchor.
✔ Durable, Heavy-Duty Construction
Produced from high-quality cast steel with strong resistance to bending, impact, and corrosion, making it suitable for long-term operations in harsh marine environments.
✔ Low Maintenance & Long Service Life
With a simple mechanical structure and no complex moving parts, the JIS-F3301 Stockless Anchor requires minimal upkeep compared to other anchor types.
✔ Certification Ready
Available with certificates from major classification societies such as ABS, LR, BV, DNV, ensuring compliance with international marine safety and manufacturing standards.
